1. Počevši
  2. Kontroleri, pojačala, RF i WiFi upravljački sustavi
  3. 2,4G Smart sustav rasvjete

RF rotacijski daljinski upravljač za LED rasvjetu, 1 zona

Aрт. № SSG1Z
RF rotacijski daljinski upravljač za LED rasvjetu, 1 zona
RF rotacijski daljinski upravljač za LED rasvjetu, 1 zona RF rotacijski daljinski upravljač za LED rasvjetu, 1 zona RF rotacijski daljinski upravljač za LED rasvjetu, 1 zona RF rotacijski daljinski upravljač za LED rasvjetu, 1 zona

RF rotacijski daljinski upravljač za LED rasvjetu, 1 zona

Art. br. SSG1Z
opis:
  • Working voltage: 2x AAA batteries (2х1.5 V)
  • Number of control zones: 1
  • Frequency: 2.4 GHz
  • Index of protection: IP20
  • Remote distance: up to. 20 m
  • Dimensions: Ø60 x 35 mm
  • Working temperature: 0⁰ C ÷ +40⁰ C
  • Warranty: 2 years

SSR1Z is an RF touch remote that can control only a group of already paired drivers and power supplies for LED light from the series – SSD1330, SSD40850, SSD1216.

Code learning operation between remote controls: Used to unify system code values or copy a new remote control.

Range of control on 2.4G Smart system is not limited from the range of remote controller. In a large premises, exceeding the range of remote controller, drivers/dimers transmits signal among themselves and inspect the light state for each other. This is possible when distance between drivers/dimers is less than 10 meters.

tehničke karakteristike:
RF frekvencija 2.4 GHz
Stupanj zaštite IP20
Raspon radne temperature -10 °C ÷ +40 °C
Dimenzije Ø60/35mm
Baterija 2 x AAA
Opseg 20m
Jamstvo 2 godine
Zone kontrole 1 zona
opis:
  • Working voltage: 2x AAA batteries (2х1.5 V)
  • Number of control zones: 1
  • Frequency: 2.4 GHz
  • Index of protection: IP20
  • Remote distance: up to. 20 m
  • Dimensions: Ø60 x 35 mm
  • Working temperature: 0⁰ C ÷ +40⁰ C
  • Warranty: 2 years

SSR1Z is an RF touch remote that can control only a group of already paired drivers and power supplies for LED light from the series – SSD1330, SSD40850, SSD1216.

Code learning operation between remote controls: Used to unify system code values or copy a new remote control.

Range of control on 2.4G Smart system is not limited from the range of remote controller. In a large premises, exceeding the range of remote controller, drivers/dimers transmits signal among themselves and inspect the light state for each other. This is possible when distance between drivers/dimers is less than 10 meters.

Povezani proizvodi