SSD1216 is a dimmer designed for LED strips. It is controlled by any UltraLux® 2.4G RF remote device and is compatible with all 12 V DC and 24 V DC UltraLux® LED strips.
The dimmer must be connected to 12-24V DC power supply which depends on the LED strip load. The dimmer has power lost memory function and will remember the last working mode. It can be controlled by any RF remote from the series and can be paired with up to 4 remotes at once. Each remote can control unlimited drivers and dimmers. Please pair it with the remote if zone-setting or unique- control is needed. Each RF remote control has a manual operation instruction how to pair it.
The command range of the 2.4G Smart system is expanded and isn’t limited to the range of the remote-control device. In bigger rooms/premises, exceeding the command range of the remote-control, the drivers/dimmers transfer the commanding signal between them and mutually check each other’s condition. This is only possible when the distance between two neighboring drivers/dimmers is less than 10 meters.
