1. Home
  2. Controllers, amplifiers, RF and WiFi systems for LED lighting
  3. 2.4G smart lighting system

Smart 2.4G RF dimmable driver 40W, 850mA, 220-240V AC

Aрт. № SSD40850
Smart 2.4G RF dimmable driver 40W, 850mA, 220-240V AC

Smart 2.4G RF dimmable driver 40W, 850mA, 220-240V AC

Art № SSD40850
description:

SSD40850 is a dimmable 40 W LED driver, output current 850 mA(max) DC. It is controlled by any UltraLux® 2.4G RF remote device. It is compatible with all models 40W LED panels Ultralux.

The dimmer must be connected to 12-24V DC power supply which depends on the LED strip load. The dimmer has power lost memory function and will remember the last working mode. It can be controlled by any RF remote from the series and can be paired with up to 4 remotes at once. Each remote can control unlimited drivers and dimmers.  Please pair it with the remote if zone-setting or unique- control is needed. Each RF remote control has a manual operation instruction how to pair it.
The command range of the 2.4G Smart system is expanded and isn’t limited to the range of the remote-control device. In bigger rooms/premises, exceeding the command range of the remote-control, the drivers/dimmers transfer the commanding signal between them and mutually check each other’s condition. This is only possible when the distance between two neighboring drivers/dimmers is less than 10 meters.

specifications:
Max output power DC 40W
Input voltage AC 220-240V
Frequency 50-60Hz
Output current 850mA
Output voltage 24-42V
RF frequency 2.4 GHz
Protection rating IP20
Working temperature range -10 °C ÷ +40 °C
Dimensions 45/135/32mm
Control type RF
Warranty 2 years
description:

SSD40850 is a dimmable 40 W LED driver, output current 850 mA(max) DC. It is controlled by any UltraLux® 2.4G RF remote device. It is compatible with all models 40W LED panels Ultralux.

The dimmer must be connected to 12-24V DC power supply which depends on the LED strip load. The dimmer has power lost memory function and will remember the last working mode. It can be controlled by any RF remote from the series and can be paired with up to 4 remotes at once. Each remote can control unlimited drivers and dimmers.  Please pair it with the remote if zone-setting or unique- control is needed. Each RF remote control has a manual operation instruction how to pair it.
The command range of the 2.4G Smart system is expanded and isn’t limited to the range of the remote-control device. In bigger rooms/premises, exceeding the command range of the remote-control, the drivers/dimmers transfer the commanding signal between them and mutually check each other’s condition. This is only possible when the distance between two neighboring drivers/dimmers is less than 10 meters.

Related products