The LED solar floodlight is a very successful solution for façade and garden lighting. The photovoltaic panel and the rechargeable battery ensure an independent off-the-grid power supply. The floodlight has a built-in PIR movement sensor and a photocell.
Advantages:
- Seven operational modes in accordance with the customer’s most popular preferences.
- Solar panel from monocrystal silicon, characterized with higher efficiency. They achieve greater results in comparison with the polycrystal panels with the same size.
- Mounting bracket, allowing the panel to be mounted under a different angle.
- The solar panel and the floodlight are equipped with water resistant protector IP65 (Plug and Play).
- Extension cable (3 meters) between the panel and the floodlight that allows a greater choice of an installation spot.
- PIR movement sensor with 12-meter operational radius. This helps to save the battery’s energy, as in sensor mode the floodlight will work with maximum brightness only if a movement is detected. In the meantime, the floodlight only uses the “night light” mode (5% brightness).
- User friendly IR remote control for quicker and easier operation.
- Indicator for the level of the battery charge.
- Anti-moisture membrane valve that allows the condensed moisture to be taken out from the floodlight.
- Polycarbonate optical system on each diode chip, directing the light in narrow 90° angle.
- Rechargeable accumulator battery LiFePО4, characterized with longer life (more on/off cycles). This technology is safer than the Li-Ion type batteries. The floodlight could work 3h in max. power and 14h in Auto regime. Short charging time 4-6 h.
LED FLOODLIGHT
- Max. Power: 10 W
- Max. luminous flux: 2000 lm max
- Night light: 100 lm
- Corelated colour temperature: 5500 K
- Colour rendering index: Ra≥70
- Beam angle: 90°
- Dimensions: 256*211*44.5mm
- IP rate: IP65
- Warranty: 2 years
SOLAR PANEL
- Type: Monocrystalline
- Dimensions: 300*205*17mm
- Open circuit voltage: Voc= 6V
- Short circuit current: Isc=2.2 A
- Maximum power voltage: Vmpp= 5 V
- Maximum power current: Impp= 2.0 A
- Maximum power: Pmpp= 10 W
- Extension cable: 3 m
BATTERY
- Type: LiFePo4
- Capacity: 3.2 V, 12500 mAh mAh
- Charging time: min.4-6 h
- Working time: max. 14 h (Auto mode); max. 3 h (high bright)
PIR SENSOR
- Detection distance: max. 12 m
- Ambient light: <10 lx
- Detection range: 120°
